Drying equipment series

Sketch：working principleThe hot air enters the bottom of the dryer tangentially, and is driven by the agitator to form a powerful rotating wind field. The paste material enters the dryer from the screw feeder. Under the strong action of the high-speed rotati…

Sketch：working principleThe material enters the machine from the feed inlet. Under the action of vibration, the material is thrown along the horizontal fluidized bed and moves forward continuously. After the hot air passes through the fluidized bed and excha…

Sketch：product description SZG double cone vacuum dryer is a new generation drying device developed by our factory in combination with the technology of similar domestic products. The double cone vacuum adopts two elastic connection methods of belt and chain…

Sketch：working principleThe so-called vacuum drying is to heat and dry the dried materials under vacuum conditions. If a vacuum pump is used to extract air and moisture, the drying speed will be accelerated.Note: If a condenser is used. The solvent in the ma…

Sketch：working principleThe so-called vacuum drying is to heat and dry the dried materials under vacuum conditions. If a vacuum pump is used to extract air and moisture, the drying speed will be accelerated.Note: If a condenser is used. The solvent in the ma…

Sketch：product descriptionSpray drying is a widely used process in liquid process shaping and drying industry. It is especially suitable for generating powdery and granular solid products from solutions, emulsions, suspensions and pasty liquid materials. The…

Sketch：product descriptionThis unit is a device that can complete drying and granulation at the same time. According to process requirements, the pressure, flow rate and size of nozzle holes of the feed liquid pump can be adjusted to obtain the required sphe…

Sketch：product descriptionThe machine adopts a fully enclosed form, all parts are made of stainless steel, equipped with a three-stage purification device, and the filtered air reaches the level of 100,000. The cylinder and the top are equipped with cold wal…

Sketch：product descriptionThe CT-C series hot air circulation oven is equipped with a low-noise, high-temperature-resistant axial flow fan and an automatic temperature control system. The entire circulation system is fully enclosed, which improves the therma…

Sketch：product manual◎There are three heating methods: steam, electricity and electric steam.◎Using temperature: steam heating 50-140℃, up to 150℃; electric heating 50-350℃;◎The temperature is automatically controlled and recorded by a recorder;◎The i…

Sketch：product descriptionBoiling drying, also known as fluidized bed, is composed of air filter, heater, fluidized bed host, cyclone separator, bag filter, high-pressure centrifugal fan, and operating table. Due to the different nature of the dry materials,…

Sketch：working principleAfter the air is heated and purified, it is introduced from the bottom by the induced draft fan and passes through the perforated plate of the hopper. In the working chamber, fluidization is formed by stirring and negative pressure, t…