Overview：product description SZG double cone vacuum dryer is a new generation drying device developed by our factory in combination with the technology of similar domestic products. The double cone vacuum adopts two elastic connection methods of belt and chain…Consulting
SZG double cone vacuum dryer is a new generation drying device developed by our factory in combination with the technology of similar domestic products. The double cone vacuum adopts two elastic connection methods of belt and chain, so the equipment runs smoothly. The specially designed process fully reflects the good concentricity of the two shafts. The heat medium and vacuum system adopt reliable mechanical seals or rotary joints. On this basis, we developed SZG-A, which can not only stepless speed regulation, but also constant temperature control.
As a professional drying equipment manufacturer, our products are available from high-temperature heat transfer oil as the heat medium, medium-temperature steam and low-temperature hot water. When drying viscous materials, our factory will specially design a "copy board" mechanism or set up balls in the tank for you.
◎The heat energy (such as hot water, low pressure steam or heat transfer oil) is passed into the closed interlayer, and the heat is transferred to the dried material through the inner shell.
◎Under the power drive, the tank body rotates slowly, and the materials in the tank are continuously mixed to achieve the purpose of strengthening drying.
◎The material is in a vacuum state, and the vapor pressure drops so that the water (solvent) on the surface of the material reaches a saturated state and evaporates, and it is discharged and recovered by the vacuum pump in time. The water (solvent) inside the material continuously penetrates, evaporates, and discharges to the surface. The three processes are continuously carried out, and the material achieves the purpose of drying in a short time.
Adapt to materials
It is suitable for the concentration, mixing and drying of powder, granular and fiber in chemical, pharmaceutical, food and other industries and materials that require low temperature drying (such as biochemical products, etc.). It is more suitable for drying of easily oxidized, volatile, heat-sensitive, strongly irritating, toxic materials and materials that are not allowed to destroy crystals.
◎When oil is heated. Use automatic constant temperature control. Can dry biochemical products
◎With mineral raw materials, the temperature can be between 20～160oC.
◎High thermal efficiency, more than 2 times higher than ordinary oven.
◎Indirect heating. The materials will not be contaminated and meet the requirements of "GMP". The equipment is easy to maintain and operate and easy to clean.
◎Recommended process placement demonstration solvent recovery process placement.
|转速 (rpm)||4 - 6|
|工作温度 (oC)||罐内≤85 夹套≤140|
|转速 (rpm)||4 - 6|
Note: For materials with large changes in volume before and after drying, the loading factor can be appropriately increased or decreased.
Drying equipment is very widely used in industrial testing. Many fields require the use of drying equipment. Similarly, drying equipment also…
As the worlds energy consumption is increasing year by year, the burning and utilization of coal as a primary energy source releases a large …
The general requirements of the granulator used in the calcium carbonate industry are high thermal efficiency, low energy consumption, simple…
The new type of rotary flash dryer adopts a variety of devices, such as a variety of feeding devices, so that the feeding is continuous and s…
Most of China like to eat rice, and rice also accounts for a large proportion of my countrys grain cultivation. With the renewal of agricultu…
The hot air circulation oven is composed of angle steel, stainless steel plate and cold steel plate. The thermal insulation layer is filled w…